If your luxury car buttons have turned sticky, gooey, or gummy due to heat and UV exposure, you don't need to spend + replacing the entire switch assembly. Follow this 15-minute DIY restoration method.
Required Kit & Tools:
- Nolue Sticky Button Restorer Solvent (Included in Kit)
- Precision Microfiber Applicator Swabs & Wipes
- OEM Matte Anti-Wear Protective Topcoat
- Masking Tape & Nitrile Gloves
Step-by-Step DIY Workflow:
- Masking: Apply automotive masking tape around the affected buttons to protect surrounding leather and console trim.
- Dissolve & Wipe: Lightly moisten the applicator swab with the Restorer Solvent. Gently wipe across the sticky button surface in circular motions. The degraded rubberized coating will liquefy and lift off onto the swab immediately.
- Clean Residue: Wipe clean with a dry microfiber cloth to expose the crisp original laser-etched button graphics.
- Seal & Protect: Apply a single thin coat of the Matte Protective Sealant. It cures in 10 minutes to a permanent, non-sticky factory OEM touch.
Pro Tip: 100% water-based formula is safe on OEM backlit illumination and electronics.